Fast CAN transceivers with integrated ESD protection for vehicle body networks

August 30, 2013 // By Graham Prophet
Texas Instruments has introduced two 5-V controller area network (CAN) transceivers compliant with ISO 11898-2 and ISO 11898-5 standards for automotive networking. That integrate powered electrostatic discharge (ESD) protection of up to 8 kV for contact discharge and 15 kV for air discharge.

HVDA551-Q1 and HVDA553-Q1 reduce overall system cost and size, while offering design flexibility with two device configurations. The HVDA551-Q1 and HVDA553-Q1 meet the demanding requirements of US OEM testing without the need for external protection diodes and common-mode choke. Applications in which these new devices may be used are automotive body control modules, infotainment and advanced driver assist systems (ADAS), vehicle gateway nodes and rear-view camera modules.

By using the HVDA551-Q1 or HVDA553-Q1, engineers can eliminate the need for up to two external protection diodes per transceiver; there are two transceiver choices to meet system requirements, the HVDA551-Q1, with the ability to shift IO level voltages; and the HVDA553-Q1 with a common- mode bus stabilisation output. Both devices also have under-voltage lock-out (UVLO) protection and dominant state timeout features. Simulation models for both are available.

In an 8-pin SOIC package they cost $0.60 (1,000)

TI, and