Designed to provide the power-supply requirements of next-generation car audio and infotainment systems, the AEC Q100 qualified device incorporates all the control and protection circuitry required for a high-current regulator with ±1.0% output voltage accuracy.
A key feature of the A8580 is the use of pulse-frequency modulation (PFM) to produce a very low input quiescent current while supplying a “keep alive” voltage supply in standby mode. The IC is guaranteed to draw less than 50 µA from a 12 V input while supplying 3.3 V at 40 µA. In addition, to work down to idle-stop battery conditions, the A8580 will operate down to at least 3.6 V input with the input voltage falling.
Other features of the A8580 include switching frequency clock synchronisation and an ultra-low current shutdown mode requiring less than 5 µA. The A8580 has external compensation to accommodate a wide range of frequencies and external components, and provides a power-on reset signal validated by the output voltage.
Comprehensive protection features include pulse-by-pulse current limit, “hiccup” mode short-circuit protection, open/short asynchronous diode protection, “boot” pin open/short voltage protection, input undervoltage lockout, output overvoltage protection and thermal shutdown.
The A8580 is supplied in a low-profile 16-pin TSSOP package (suffix LP) with exposed pad for enhanced thermal dissipation.
Further information can be found at www.allegromicro.com