Flyback switcher IC achieves high efficiency in BEV and PHEV applications

Flyback switcher IC achieves high efficiency in BEV and PHEV applications

New Products |
The InnoSwitch3-AQ is an AEC-Q100-qualified flyback switcher with integrated 750 V MOSFET and secondary-side sensing. The newly qualified device family from HV semiconductor expert Power Integrations targets automotive EV applications, such as traction inverter, OBC (on-board charger), EMS (energy management DC/DC bus converters) and BMS (battery management systems).
By Christoph Hammerschmidt

Share:

The InnoSwitch3-AQ uses Power Integrations’ high-speed FluxLink coupling technology to achieve ±3% accuracy for combined line and load regulation while eliminating both dedicated isolated transformer sense-windings and optocouplers. The FluxLink technology maintains output voltage regulation even under the transient stress test. The integrated 750V MOSFET meets stringent automotive de-rating requirements, and an on-chip synchronous rectifier controller delivers above 90% efficiency at the nominal 400 VDC input voltage. InnoSwitch3-AQ designs achieve less than 10 mW no-load energy usage across the input voltage range. The InnoSwitch3-AQ family ICs are packaged in a surface-mount InSOP with 11 mm primary to secondary creepage, which exceeds the stringent requirements for high altitude (> 5000 m) isolation.

The DER-840Q reference design incorporating the newly released IC demonstrates start-up, shutdown and efficient operation from 30 VDC to 550 VDC input, as well as fast transient response and a variety of safety and protection features.

The products are available in the InSOP-24D package

https://ac-dc.power.com/products/innoswitch3-aq

Linked Articles
eeNews Automotive
10s