Solar power supports battery of 18-tonne truck

Solar power supports battery of 18-tonne truck
Technology News |
Solar power as a supplementary energy source has been a reality for some time - but so far only for passenger cars and smaller vehicles. Fraunhofer has now equipped a full-grown 18-tonne truck with a solar system on the roof. It supplies up to 3.5 kW of energy - enough to extend the truck's range by 5 to 10%.
By Christoph Hammerschmidt

Share:

Together with industrial partners and the Fraunhofer Institute for Transportation and Infrastructure Systems IVI, the Fraunhofer Institute for Solar Energy Systems ISE has developed a system of solar modules and power electronics for integration in commercial vehicles for the first time in the “Lade-PV” project. The vehicle has now been approved for road traffic – the Fraunhofer researchers see this as a milestone towards more climate-friendly road freight transport.

“With the successful commissioning of our high-voltage photovoltaic system, we have achieved our goal of demonstrating the feasibility of vehicle-integrated photovoltaics for heavy-duty e-commercial vehicles,” explains Christoph Kutter, project manager at Fraunhofer ISE. The particularly light and robust PV module prototypes developed by the institute were built by Sunset Energietechnik GmbH. TBV K├╝hlfahrzeuge GmbH then integrated the modules into the box body of a Framo electric truck, which serves as the first demonstrator vehicle.

To ensure that the electricity yields are high but the material and cabling costs are low, the solar modules were connected in series in the roof. The resulting voltages of up to 400 volts could pose a safety risk in the event of an accident. To prevent this risk, Fraunhofer ISE has developed a disconnection device. It is located in the junction box of each PV module and is able to disconnect the power connection decentrally within milliseconds and without additional communication channels in the event of an accident. Only harmless extra-low voltages are then present in the entire system.

Just like the PV modules, the power electronics were also adapted to the requirements of the commercial vehicle. The research consortium therefore developed a DC power controller that communicates with the vehicle control system via CAN bus and is integrated into the vehicle’s safety concept. The photovoltaic power from the roof is fed directly into the on-board network of the commercial vehicle.

The truck with the photovoltaic system is now in daily use in the Freiburg area and will now be regularly tested for a year to validate the electricity yield forecast and monitor the components under real conditions. Furthermore, the trips of the demo truck are accompanied by the energy forecast model “IVImon” of the Fraunhofer Institute for Transportation and Infrastructure Systems IVI. This forecasts the range, charging times and power generation for different routes depending on the consumption in the vehicle and the solar radiation.

https://www.ise.fraunhofer.de/en.html

Related articles:

E-car manufacturer Sono Motors reaches crowdfunding target

Solar at the tipping point of mass adoption in EVs, says IDTechEx

Survey shows strong European support for technology

Dutch team looks to solar desert rally in Morocco

 

Linked Articles
eeNews Automotive
10s