Fuel pump controller makes motorcycles greener

October 28, 2020 //By Christoph Hammerschmidt
Fuel pump controller makes motorcycles greener
The MLX80302 motorcycle fuel pump controller from Melexis helps manufacturers comply with tightening environmental regulation, including the BS-6 emission standards in India.

The MLX80302 is a three-phase BLDC motor controller IC with a peak driving capability of 2.6A. It is suited for automotive and motorcycle pump applications up to 20W on the 13V battery voltage. Additionally, it is also a good fit for a wide range of home appliances and industrial pump applications up to 40W on a 24V regulated supply.

The controller boasts a wide junction temperature operating range of -40°C to +150°C. With its 0.25 Ohm drivers, the MLX80302 features a powerful monolithic pump controller in an SOIC8 footprint. Requiring only reverse polarity protection and a single decoupling capacitor, it is a perfect fit for integration into a pump connector.

The MLX80302 features extensive integrated protection including locked rotor, overtemperature, overvoltage, short circuit and current limiting. The motor control operation has been validated for robust operation with remote motor location in very noisy environments, with tests including BCI, and ignition coil noise injection. Its very fast start-up (down to 50ms) is robust under load- and no-load conditions.

The device is programmable via an I2C interface and all options are configurable in the on-board EEPROM. Several PWM input options can be selected, and the motor start-up procedure can be configured to reach the maximum target speed for fuel pumps under pressure in less than 60ms. The chip is available in a SOIC8 exposed pad package.
 

More information: https://www.melexis.com/


Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.