Porsche Taycan - through the engineer’s eyes : Page 2 of 2

September 04, 2019 //By Christoph Hammerschmidt
Porsche Taycan
Porsche is currently officially introducing the Taycan, the manufacturer's first battery- powered super sports car. At an engineering conference a couple of weeks ago, Uwe Michael, head of electrics and electronics at Porsche, provided a deep look into the technical heart of the potential "Tesla Killer".

The Taycan's high-voltage system comprises more than ten subsystems. The front and rear axles are each driven by their own electric motors with attached control electronics. In addition, the Taycan has the most powerful heater in its class with more than 10 kilowatts. It not only serves the comfort of the occupants, but also keeps the battery at optimum operating temperature. A special DC/DC converter with 48 V output voltage is available for controlling the actuators in the chassis. A real novelty is the HV booster - if necessary, it increases the input voltage at the charging plug from the widely available 400 to the still rather exotic 800 volts. "This makes us more independent of the charging infrastructure," explained Michael.

Higher voltage for less weight

By the way, Porsche relies on motorsport experience for the high-voltage battery - in Le Mans the company did not send an electric vehicle to the 24-hour torture, but it did send a plug-in hybrid, with: exactly, an 800-volt battery. Developed together with LG, the battery for the Taycan will be produced in Poland. Four operating modes are available for charging: The standard method on the domestic wallbox with 11 kW alternating current, the option with 22 kW and also alternating current as well as the direct current variants with 400 Volt and 50 or 150 kW as well as the maximum variant with 800 Volt, which is intended as the standard operating mode and requires a full 350 kilowatts from the charging station. Michael told the engineers, however, that they should be prepared for the fact that the charging infrastructure backend is not always fully up to requirements of fast-charging Taycans.

The driver's workplace is dominated by electronic displays,
virtual instruments and touch controls (C) Porsche

This leads to the question: Why on earth, 800 volts? Yes, because of faster charging. But there is another interesting aspect: Because of the cable diameters. The higher voltage makes thinner wiring possible. "This enables us to save dozens of kilograms in weight," says the Porsche mastermind. And, last but not least, what about the "Additional Highlights" that Michael announced at the beginning of his presentation? What is meant here is a Burmester sound system that will probably be second to none: It has more than 1000 watts of output power, contains 21 amplifiers and, according to Michael, “it withstands fast curves.”


Related articles:

Porsche gets serious with electric cars

Porsche goes to the starting blocks for the electric age

Electric mobility just before switching to the fast lane

Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.