The new chip varistors offer reliable protection against transient surge voltages according to ISO 7637-2, and meet the failsafe requirements according to the VW standard VW 80808. Even when subject to excessive bending stress, short-circuits are avoided, which is particularly important for unswitched battery terminals.
The new surge protection components are designed for an operating voltage of 14 V RMS or a maximum direct voltage of 16 V DC. The three types of the B725*0G1140S862 series are designed for surge currents of 120 A, 200 A and 400 A, with each 8/20 µs. Depending on the surge current capability, the chip varistors are available in sizes EIA 0805, 1206 and 1210, and are suitable for a wide temperature range of -55°C to +150°C.
|Operating voltage, max. [V]||Surge current, max. (8/20 µs) [A]||Terminal voltage |
Further information is at www.tdk-electronics.tdk.com/en/ctvs